[Method] How To Recover Your Android/Java/Symbian Phone From Dead State

 Hii Friends ! I know we all likes Customization on our Android Devices. For Doing so we used to Root our device and install Custom Roms. And sometimes we encounter a serious issue and our mobile isn't starting anymore, not even charging. In that case we say that the phone is "Dead". Today i will explain you how to recover your Android Device From Dead State. 

Summary: This post is about how to recover the Nokia/MTK Android phone, if it has gone Dead.

 First of all you have to learn how and when phone becomes Dead. We've mentioned several articles below for you to completely understand this term.

First of all, lets get something straight. Most people use the term "bricked" improperly. A Bricked phone means one thing: your phone won't turn on in any way, shape or form, and there's nothing you can do to fix it. It is, for all intents and purposes, as useful as a brick. A phone stuck in a boot loop is not bricked, nor is a phone that boots straight into recovery mode. These are things you can usually fix, and they're a lot more common than a truly bricked phone. If your phone is actually bricked, you won't be able to fix it yourself.

1. How Phone gets Bricked?

Basically, phone get bricked during the installation of Android OS (flashing).
If flashing is interrupted by low battery or loose cable connection during flashing.
If your android phone has been powered by Mediatek CPU and either you are using wrong firmware or a custom ROM (unstable) to flash your phone, your android mobile will get dead.
Result: Phone will not boot even after holding the power key and it will not accept charging.
It will get stuck at logo or will restart every time I.e., Boot loop or Restart loop.
Unable to Shift phone in Recovery mode.
In this situation, Hard Reset will not work.
2- Why Phone becomes dead (MTK Android Phone)? While installing Custom ROM or Stock firmware (unstable), Preloader(.bin) file becomes corrupted.
Preloader is the file in MTK android phone which helps to boot the phone.
3- Steps to Fix/Unbrick Dead Phone (Mtk Android/Nokia Java)

Now, after getting clues why phone has been dead. we will now proceed further to fix/Unbrick Mtk Android phone and Nokia Java/Symbion phones.

 Android Phone [Mediatek]

Tools & Software Required:

1. SP Flash tool
2. Android Stock ROM 
3. MTK USB Driver (Steps to installation) | Download Here |
4. PC or Laptop
5. Dead MTK Phone
6. USB cable

Steps to Fix/Unbrick Dead Android (MTK) Phone 

Step 1. First Install Usb Vcom Driver To Your Pc. (see Below how to install)
Step 2. Now Extract Spflash Tool and Open "Flash Tool".

***Your PC should be running on 32/64 bit irrespective of Window version.

SP Flash tool has 4 Dropdown, Its meaning & How to use:

a- Download only : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.

b- Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)

c- Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)

1- Install MTK driver.

2- Download the tool.

3- Unzip it and double click on Flash_tool.exe.

4- It will launch the tool.

5- Download Android stock ROM, unzip it.

6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).

7- Click on Download.

8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.

9- Flashing starts and when completed, Download OK will appear.

Methods To Flash Rom/Firmware using SP FlashTool

1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's no SD card in the phone (if there's an SD card slot)

2. Launch SP Flash Tool as Administrator

SP Flash Tool

3. Click on Scatter-loading option & browse to the scatter file of your Stock ROM. (You can find the scatter file with the original stock rom zip file)

SP Flash Tool Scatter file selection

This will load few names on your screen with a selected box. 

4. Now, if you want to format your phone, Click Format at the top. 

5. Once you are done with everything, click on the download button at the top of the window

Start flashing

6. Stop should now be prominent while other options should be grayed out 

7. Connect the switched off phone (with battery inside) to the PC via USB cord 

8. A progress bar should start running 

9. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone.

Final words

As the procedure is bit complex for newbies. However, I have tried to make it as simple as possible. Don't worry! if you are stuck at any point, you can contact us from the below comment form.   Posted@spflashtooldownload.com

Nokia Dead Phone (Java/Symbion)

Tools & Software Required:

1. Phoenix Tool (Disable anti virus while installing)
2. Nokia Stock ROM 
3. Nokia PC Suite
4. PC or Laptop
5. Dead Nokia Phone
6. USB cable

Steps to Fix/Unbrick Dead Nokia Phone (Coming soon)

***Your PC should be running on 32 bit irrespective of Window version.

1- Install Nokia PC Suite.

2- Run Phoenix tool, after installation tool interface will appear like this.

3- Click on Tools–>Data Package download.

4- Download the Nokia Firmware .

5- After installation, Check path where Firmware has to be placed. (C:\Program Files\Nokia\Phoenix\Products)

6- Now, Make a Folder of the Model no which you are trying to flash.

7- Now, Place the firmware in RM-596 folder.

8- Click on File–> Open product.

9- In type Filter, enter the model no.

10- Click on Ok.

11- Click on Flashing–>Firmware Update. It will open Firmware Update Box, Click on Product code browse button (…) and One pop up will appear. Select the product code and click on Ok.

12- Select “Dead Phone USB Flashing”, which is in the Firmware Update box.

13- Click on Refurbish button, pop up will appear with installation instruction.

14- Switch off phone and connect it to PC using USB cable and Follow the instruction as in pop up.

15- Flashing starts and when completed Phoenix tool will notify, phone will reboot once after completion of flashing.

***In some cases Mobile will start charging as soon as connected to PC via. USB, to avoid this unplug battery and connect phone to PC without battery, as soon as the flashing starts connect the battery.

This Is it. Now You can see that your phone is became alive again. Dont Forget to Rate this Post and Subscribe to Droidadda 😀