Flash stock With SP Tool
You need:
2. Stock Rom (SW M10_1G_S010).(SW S105).
4. SP Flash tool(Here)
5.X1Grand.
6.USB data ccable .
7.Alittle bit mind.
Procedure::--
★ Step 1: First of all, make sure that you have MediaTek
USB VCOM drivers installed.
★ Step 2:First of all open SP Flash Tool, then click Scatter-
loading button to load the scatter file
(MT6582_Android_scatter_emmc.txt) for your device and ignore
any message that may appear & load all things on the scatter file.
★ Step 3:Turn off your phone, remove the battery (and don't connect
the phone to pc).
★ Step 4:Press F9 (or hit Download button) and connect
your phone into the computer via USB data cable.
The process will start and a red progress bar will
appear.
★ Step 5:After the red progress bar is complete, there will
appear a purple progress bar.
★ Step 6:Right after the purple progress bar is complete, a
message will appear underneath it:
“Please insert USB cable in x seconds” and then
the download will start right away (you will see
the yellow progress bar filling up).
★ Step 7:When the yellow bar is complete, you'll get a popup
with a green circle and Download OK message,
which means that the process has been
successfully terminated.
★ Step 8:You can now safely disconnect your phone and turn
it on. The process ends here.
Note:-
√ Make sure that your drivers fully installed.
√ When u connect your phone to pc sure that u removed your battery.
Install OTA update
1. Download from link
2. place it on phone storage
3. stock recovery
2. place it on phone storage
3. stock recovery
4. go to about phone
-> system update
5. Done
Post A Comment:
0 comments: